Management features |
Switch layer |
L3 |
Multicast support |
Yes |
MIB support |
MIB II, Bridge MIB, RIPv2 MIB, RMONv2 MIB, SMON MIB, Ethernet-Like-MIB, MAU MIB, Entity MIB, Ping MIB |
Switch type |
Managed |
Quality of Service (QoS) support |
Yes |
Web-based management |
Yes |
System event log |
Yes |
Ports & interfaces |
Basic switching RJ-45 Ethernet ports quantity |
24, 20, 24 |
SFP/SFP+ slots quantity |
4 |
Copper ethernet cabling technology |
1000BASE-T, 1000BASE-TX, 100BASE-TX, 10BASE-T |
Ethernet LAN (RJ-45) ports |
20 |
Networking |
Networking standards |
IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3u, IEEE 802.3x |
Full duplex |
Yes |
IP routing |
Yes |
10G support |
Yes |
Spanning tree protocol |
Yes |
DHCP server |
Yes |
IGMP snooping |
Yes |
Rate limiting |
Yes |
Link aggregation |
Yes |
Flow control support |
Yes |
Routing entries |
2000 |
Broadcast storm control |
Yes |
Port mirroring |
Yes |
Auto MDI/MDI-X |
Yes |
DHCP client |
Yes |
Data transmission |
Supported data transfer rates |
10/100 Mbit/s |
Switching capacity |
128Gbit/s |
Throughput |
95M ppsMpps |
MAC address table |
16000entries |
Number of VLANs |
256 |
Number of trunks |
24 |
Number of queues |
8 |
Maximum data transfer rate |
1Gbit/s |
Jumbo frames support |
Yes |
Security |
Security algorithms |
802.1x RADIUS, SSH, SSL/TLS |
MAC address filtering |
Yes |
SSH/SSL support |
Yes |
Static port security |
Yes |
Access Control List (ACL) |
Yes |
Protocols |
Management protocols |
IGMPv3, SNMPv1/v2c/v3, XRMON |
Data link protocols |
LLDP |
Supported network protocols |
IPv6, UDP, TFTP, ICMP, TCP, ARP, TELNET, BOOTP, SNTP |
Design |
Rack mounting |
Yes |
Colour of product |
Black, Grey |
Form factor |
1U |
Safety |
EN/IEC, CAN/CSA, UL |
Electromagnetic compatibility |
FCC, EN, CISPR-22, VCCI |
Performance |
Built-in processor |
ARM1156T2S |
Processor clock speed |
515MHz |
Internal memory |
512MB |
Flash memory |
4MB |
Memory type |
SDRAM |
Packet buffer memory |
6MB |
Noise level |
53.5dB |
Power |
AC input voltage |
100-240V |
AC input frequency |
50/60Hz |
Power consumption (typical) |
82W |
Input current |
1.7A |
Input voltage |
100-127/200-240 VACV |
Power over Ethernet (PoE) |
Power over Ethernet (PoE) support |
No |
Operational conditions |
Operating temperature (T-T) |
0 - 55°C |
Storage temperature (T-T) |
-40 - 70°C |
Operating relative humidity (H-H) |
15 - 95% |
Storage relative humidity (H-H) |
15 - 95% |
Operating altitude |
0 - 3000m |
Heat dissipation |
279BTU/h |
Weight & dimensions |
Width |
442mm |
Depth |
365.8mm |
Height |
44mm |
Weight |
4950g |
Other features |
Management platform |
HP PCM+; HP PCM; command-line interface; Web browser; out-of-band management (serial RS-232C) |
Latency |
2.9µs/1.3µs |
Dimensions (WxDxH) |
442 x 365.8 x 44mm |
Connectivity technology |
Wired |
Electromagnetic immunity |
EN 55024, CISPR 24; IEC 61000-4-2; 4 kV CD, 8 kV AD; IEC 61000-4-3; 3 V/m; IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line); IEC 61000-4-5; 1 kV / 2 kV AC, 1 kV signal, 0.5 kV DC; IEC 61000-4-6; 3 V; IEC 61000-4-8; 1 A/m; IEC 61000-4-11; > 95% reductions, 0.5 period; 30% reduction, 25 periods; IEC 61000-3-2; IEC 61000-3-3 |
Input frequency |
50 - 60Hz |
Power availability |
1.7W |
Networking features |
Gigabit Ethernet |
I/O ports |
20 autosensing 10/100/1000 ports(IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T), Media Type: Auto-MDIX, Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only; 4 dual-personality ports, each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a mini-GBIC slot (for use with mini-GBIC transceivers); 1 RJ-45 serial console port; Supports a maximum of 4 10-GbE ports, with optional module |
Heat dissipation note |
max. using PoE+ |
Memory and processor |
Processor: Dual ARM1156T2S @ 515 MHz, 4 MB flash, packet buffer size: 6 MB, 1 GB compact flash, 512 MB SDRAM |
Mounting |
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only |
Power requirements |
The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz
|